Rust-Oleum Hard Hat Galva Zinc Alu is a fast drying, zinc rich coating based on an epoxy ester resin. The product contains pure zinc and aluminium as pigments and provides cathodic protection.
This product should be used on new, bare steel, blasted steel or galvanized steel surfaces. Primarily intended for brush application on small areas or aerosols can be used for touch-up. Can be recoated with non-saponifiable coatings. It can be used as a single coat in light industrial exposures, corrosive environments and high humidity areas.
For new, bare, rust-free metal or galvanised steel
Resists 340 hours of salt spray testing (DIN)
Heat-resistant up to 100°C
Dry to handle: 60 minutes
Coverage: 10.5 m²/L or 1.2m² per 500ml aerosol
Recommended use
Should be used on damaged galvanized steel surfaces. Can be applied to small areas or for touch-up. Use as a single coat in light industrial exposures, corrosive environments and high humidity areas
Technical data
Gloss Level: Matt, Metallic
Propellant: Dimethyl ether
Heat Resistance: 450°C (dry heat)
VOC Level – 647 g/l
Drying times at 20°C/RH 50%
Touch dry: 20 minutes
Dry to handle: 60 minutes
Dry to recoat: Within 2 hours or after 48 hours
Fully cured: 7 days
Lead and chromate free thus eliminating the danger of poisonous gases escaping if the coated surface needs to be welded at a later date.
Shelf life
3 years from date of production in unopened cans, if stored in dry, well-ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Look after the pennies and the pounds will look after themselves – as true today as its always been! And there’s some very simple steps that can be taken to reduce daily running costs of any business, across all departments.